HIGH-DENSITY POLYETHYLENE (HDPE) / MEDIUM DENSITY POLYETHYLENE (MDPE)
Blown Film Resins
Material Code | Application | |
|---|---|---|
Q TR-144 | Industrial liners, bags and packaging films | |
Q TR-131 | Industrial liners, grocery sacks, bags and packaging films |
Blow Molding Resins
Material Code | Application | |
|---|---|---|
Q5502BN | Containers for packaging food, household | |
Q5202BN | Containers for packaging food, household | |
Q50100 | Shipping containers (up to 210L), large | |
Q TR-571 | Large part blow molding drums |
Geomembrance
Material Code | Application | |
|---|---|---|
Q TR-400 | Geomembrane | |
Q K307 | Pond liners, gas and chemical tank |
Pipe
Material Code | Application | |
|---|---|---|
Q 3802 | PE 80 pressure pipe and fittings |
HDPE & MDPE STORAGE, SAFETY AND FOOD CONTACT
Storage
HDPE & MDPE products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area. As a general rule, HDPE & MDPE products should not be stored for more than three months from receipt date. HDPE & MDPE products should not be exposed to direct sunlight and/or heat in any form since this may adversely affect the properties of the product.
SAFETY
Under normal conditions, HDPE & MDPE products do not present a toxic hazard through skin contact or inhalation. For more detailed information please refer to the Material Safety Data Sheet.
FOOD CONTACT
HDPE & MDPE products comply with most EU and US food contact legislations. Limitations may apply.
NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS
HDPE & MDPE products are not suitable for pharmaceutical or medical applications.
