HIGH-DENSITY POLYETHYLENE (HDPE) / MEDIUM DENSITY POLYETHYLENE (MDPE)

Blown Film Resins

Material Code

Application

Q TR-144

Industrial liners, bags and packaging films

Click here

Q TR-131

Industrial liners, grocery sacks, bags and packaging films

Click here

Blow Molding Resins

Material Code

Application

Q5502BN

Containers for packaging food, household
chemicals (bleaches, detergents, etc.),
other thin walled parts

Click here

Q5202BN

Containers for packaging food, household
chemicals (bleaches, detergents, etc.)

Click here

Q50100

Shipping containers (up to 210L), large
blow molded parts, sheet

Click here

Q TR-571

Large part blow molding drums

Click here

Geomembrance

Material Code

Application

Q TR-400

Geomembrane

Click here

Q K307

Pond liners, gas and chemical tank
containment liners and landfill liners

Click here

Pipe

Material Code

Application

Q 3802

PE 80 pressure pipe and fittings

Click here

HDPE & MDPE STORAGE, SAFETY AND FOOD CONTACT

Storage

HDPE & MDPE products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area. As a general rule, HDPE & MDPE products should not be stored for more than three months from receipt date. HDPE & MDPE products should not be exposed to direct sunlight and/or heat in any form since this may adversely affect the properties of the product.

SAFETY

Under normal conditions, HDPE & MDPE products do not present a toxic hazard through skin contact or inhalation. For more detailed information please refer to the Material Safety Data Sheet.

FOOD CONTACT

HDPE & MDPE products comply with most EU and US food contact legislations. Limitations may apply.

NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS

HDPE & MDPE products are not suitable for pharmaceutical or medical applications.

NEED ADVICE on your business growth, customer experience or your finances 

Go to top